The first step to installing a radar eye is to choose a location. There are so many different placements throughout the films. I chose a position that looked best to me. Kind of an average. I just held it up and traced the position.
Next The trick is you have to transfer the the holes to the dome. To do this i followed some suggestions from the club. Just break off little pieces of a sharpie and stick them in the holes. Then line up the eye with the marks from the earlier step and press. Then just cut the holes.
Then i drilled the holes and temp mounted it. I traced the main eye hole and cut it the same as the other round holes.
No comments:
Post a Comment